Team BlackSheep Online Store - BetaFPV Beta85X Whoop FPV (4S) with Crossfire
Forgot Password
8-20 characters, no space
BetaFPV Beta85X Whoop FPV (4S) with Crossfire

BetaFPV Beta85X Whoop FPV (4S) with Crossfire

Beta85X comes back now with the upgraded function which can support 4S!

US$ 169.00

Delivery time: In stock

Beta85X comes back now with the upgraded function which can support 4S! Fast and powerful with the 1105 5000KV motors. Updated F4 V2 4S FC and BLHeli_32 ESC, which are used single N-channel MosFETs, soldered with 25V/220uf electrolytic capacitor, will definitely give you much more power, enable you to fly on 450mAh 4S battery safely. Perfectly suitable for racing. Fully enjoy the powerful explosive force and awesome flight experience that the drone bring to you!

Features

  • Beta85X pushes the new era of brushless whoop drones to a higher level. With the new power system, you could fly real acro even with EOS2 camera in racing or freestyle on 4S power.
  • With the high performance STM32F051K66 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD) , faster input signals with lower latency and higher update rate are reachable, give you much more power. 
  • Comes with upgraded F4 V2 4S FC, this FC is equipped with ports which support to plug the receiver, ESC, led board and VTX directly, no need to solder, convenient for installation.
  • Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.
  • Upgraded 1105 motor from 6000KV to 5000KV, with a light weight but definitely will give you extreme power and speed to fly on 4S. Motor comes with cable connectors. Just plug and play. EMAX Avan 2" prop is the best combo in this Beta85X drone.
  • 450mAh 4S high rate battery is recommended by default. But pilot could also use their own batteries with battery strap. Optional and affordable.

Specification

  • Weight: 68.1g (without battery)
  • F405 Flight Controller & 16A BLHeli_32 ESC V2.0
  • Motors: 1105 5000KV with connector
  • Props: EMAX Avan 2" 4-Blades Props
  • FPV Camera: Customized EOS2 Camera
  • FPV Canopy: Canopy for EOS2 Camera
  • Receiver Option: TBS Crossfire
  • Battery: 4S 450mAh Battery (Not including)
  • 5.8G FPV antenna
  • Flight time: 4min - 6min with 450mAh 4S battery (smooth flight in a windless environment)

FC Specification

  • CPU: STM32F405
  • Six-Axis: MPU6000
  • Size: 26mm x 26mm, whoop mounting pattern
  • Firmware version: Betaflight OMNIBUSF4SD(OBSD)
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)

ESC Specification

  • Support BLHELI_32
  • Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
  • Input voltage: 3-4S lipo
  • Cotinue current: 16A
  • Peak current: 19A 
  • Firmware target: BETAFPV-16A-32bit
  • MCU: STM32F051K66

EOS2 Camera and VTX

The EOS2 camera comes with the FPV version of Beta85X drone. The camera tilt angle is switchable from 25 degree to 45. So that it could support different flying situations (indoors and outdoors alike).

  • Output power: 25mW and 200mW (Adjustable)
  • Smart Audio function is included for radio control
  • Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
  • TV System: NTSC
  • Field of view: 100-120 degrees with 1/3 lens



US$ 169.00