Team BlackSheep Online Store - BetaFpv F405 2-4S AIO 12A Brushless Flight Controller (BLHeli_S) V3
Forgot Password
8-20 characters, no space
BetaFpv F405 2-4S AIO 12A Brushless Flight Controller (BLHeli_S) V3

BetaFpv F405 2-4S AIO 12A Brushless Flight Controller (BLHeli_S) V3

The 20A F405 AIO FC decreases the board thickness from 1.6mm to 1.2mm, which reduced the weight to 5.3g while improving the ability of the ESC to continuous current 20A(22A burst)

US$ 42.99

Delivery time: In stock

  • Updated the F411 chip to F405, this new 12A/20A board can handle 12A/20A continuous current(13A/22A burst), gives the pilots a powerful flight. 
  • Come with 2 integrated Plug & Play Ports for both digital VTX and Rx, less solder work needed, easy to install. 
  • Completed the traditional mounting hole, more like the Toothpick type, perfectly prevent the damping pad from falling off, which is the super-easy installation in most whoop frame.
  • BETAFPV 20A/12A AIO flight controller will unify the UART, which is convenient for pilots to solder.
  • Compatible with 110X, 120X, 140X motors, pilots can use the 20A(12A) AIO FC to build a bigger quad with this powerful FC to save weight and size.

Specifications of F405 20A AIO FC V3

  • CPU: STM32F405RGT6
  • Six-Axis: MPU6000
  • Size: 26mm x 26mm
  • Firmware version: Batefight-BETAFPV405-4.2.X
  • OSD: Built in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver
  • Connecter: XT30 (Suitable for XT30/XT60)
  • Weight: 5.3g

Specifications of ESC

  • Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300,Dshot600
  • Input voltage: 2S-4S Lipo
  • Continuous current: 20A
  • Peak current: 22A
  • Firmware: BLHELI-S G-H-25

Specifications of F405 12A AIO FC V3

  • CPU: STM32F405RGT6
  • Six-Axis: MPU6000
  • Size: 26mm x 26mm
  • Firmware version: Batefight-BETAFPV405-4.2.X
  • OSD: Built in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Receiver: Support Frsky XM/XM+FCC Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver
  • Weight: 5.3g
  • Connecter: XT30

Specifications of ESC

  • Support PWM,Oneshot125,Oneshot42, Multishot,Dshot150,Dshot300,Dshot600
  • Input voltage: 2S-4S Lipo
  • Continuous current: 12A
  • Peak current: 13A
  • Firmware: BLHELI-S G-H-25

Package

  • 1 * F405 20A AIO FC V3 or F405 12A AIO FC V3
  • 4 * M1.2x4mm screws
  • 4 * M1.4x5mm screws
  • 4 * Anti-vibration rubber dampers
  • 1 * 6-Pin Connector for Digital VTX
  • 1 * 4-Pin Connector for Rx



US$ 42.99