Team BlackSheep Online Store - BetaFpv F4 1S AIO 12A Brushless Flight Controller
Forgot Password
8-20 characters, no space
BetaFpv F4 1S AIO 12A Brushless Flight Controller

BetaFpv F4 1S AIO 12A Brushless Flight Controller

F4 1S 12A AIO Flight Controller - A 1S 12A FC for building lightweight 3" toothpick drones like HX115 SE Toothpick Drone. If you want to try a bigger FPV drone than 65mm/75mm on 1S power, and still want smooth and powerful flying actions, this FC that integrates 1S 12A ESC is definitely your best choice.

US$ 49.99

Delivery time: In Stock

F4 1S 12A AIO Flight Controller - A 1S 12A FC for building lightweight 3" toothpick drones like HX115 SE Toothpick Drone. If you want to try a bigger FPV drone than 65mm/75mm on 1S power, and still want smooth and powerful flying actions, this FC that integrates 1S 12A ESC is definitely your best choice.

Specification of FC

  • Item: F4 1S 12A AIO FC (Frsky)
  • Weight: 4.74 g (without power cable and BT2.0 connector)
  • CPU: STM32F411CEU6 (100MHZ )
  • Six-Axis: MPU6000 (SPI connection)
  • Firmware version: betaflight_4.2.0_STM32F411
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Receiver: Intergrated SPI Frsky Receiver / Futaba Receiver
  • Motor Pin Connecter: 1.25mm Header Pins
  • Mounting Hole Size: 29mm x 29mm (suitable for whoop pattern mounting hole)
  • USB Port: Type-C

 

Specification of 1S 12A ESC

 

  • Built-in ESC with 12A continuous and peak 25A current
  • Input voltage: 1S Lipo
  • ESC firmware: Z_H_30_REV16_7.HEX
  • Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM

Package

  • 1 * F4 1S 12A AIO FC (Frsky)
  • 4 * Anti-vibration rubber dampers
  • 4 * M2 x 10mm screws
  • 4 * M2 x 10mm screws
  • 8 * M2 screw nut



US$ 49.99