KO MethodX 5025 10p Xclass 430kv
New X-Class motor from KO, packed with innovative features.
US$ 199.00
KO tech is the very first motor company to incorporate a cooling system to RC brushless motors that does not rely on fans or fin style designs .
The traditional fan or fin styled design calls for a fan machined in to the bell, this method has 2 major flaws. Firstly this design is" handed " meaning cw rotating motors must have a fan design orientated differently to a ccw rotating motor if the fan is to be effective. Second is that a fan, or fan shaped spokes design robs the motor of power to drive the fan and In turn lowering response times, ultimate RPM and ultimate available torque.
KOtech has developed ACPC to compress oncoming air directly at the bell spoke face forcing the air past the spokes and directly into the stator and magnet assembly.
This lowers the operating temps, increases torque and dramatically increase response times all the way along the rpm range. As a bonus the angled ring that forms the ACPC design is used as a counter balance, used to reduce the amount of putty to balance a motor bell.
We are able to "clock" the ACPC ring a full 360 ° during the balance procedure effectively halving the amount of putty needed to achieve a reading of "True" on the test equipment . This allows us to further reduce the bells weight and in turn improve motor response times.
Lastly because of this ability to reduce the amount of balance putty putty needed we have also been able to reduce the lip at the base of the motor used as a rebate to retain the putty under high RPM centrifugal forces, further reducing weight and I'm proving response times.
Features
- TEMPERED STEEL REMOVABLE SHAFT
- REPLACEABLE NON SLIP PROP PLATE .
- HOLLOW 8MM REPLACEABLE SHAFT.
- REPLACEABLE BASE PLATE.
- 7075 ALUMINIUM BELL / BASE PLATE.
- OPEN CAGE EZO 19x8mm BEARINGS.
- OIL FILLED SUMP.
- UNIQUE HALF SHAFT DESIGN REDUCES SHAFT LENGTH TO 65% OF OTHER MOTORS IN THIS SIZE CLASS.
- INTERNAL MANUAL OIL PUMP SYSTEM.
- BLACK COATED STATOR COMPATIBLE WITH CRYO SPRAY.
- BONDING AGENTS ( GLUE) USED HAVE A WORKING TEMPERATURE RANGE BETWEEN -65 AND +235°c MAKING THE MOTOR COMPATIBLE WITH CRYO SRAY.
SPECIFICATION
- 395g
- 430KV
- 12-14S
- 220°C HIGH TEMP SINGLE WINDING COPPER.
- SH52 180°c HIGH TEMP CURVED MAGNETS .
- 15MM STATOR LAMINATES.
- 15MM AIR GAP.
- CUSTOM SYNTHETIC NYLON WINDING FENCE WOUND INTO STATOR.
- ACPC DESIGNED BELL.
- INTEGRATED OIL SEAL ON TOP SHAFT.
- 3 WAY ACCESSIBLE WET SUMP , UNDER THE TOP SHAFT , OIL SUMP PLUG IN BASE AND THROUGH REMOVAL OF THE BASE PLATE.
