Features

FC

• Latest STM32G4 Processor
  
  • 170Mhz + Math accelerator
  • MPU6000
• Supply voltage 12-25V (3S-6S Lipo voltage)
• 2x dedicated onboard 5V BEC for VTX (max. 600mA each)
  
  • 5V BEC for RX
  • 5V/16V BEC for VTX (switchable and real Pit*)
• 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
  
  • VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
• 2x 4 pin connector for receiver and VTX
  
  • Signal, telemetry, 5V, gnd
  • Gnd, 5V, TX1, RX1
• 5 UART serials
  
  • UART 1 free
  • UART 2 used for Receiver
  • UART 3 free
  • UART 4 free
  • UART 5 used for ESCs / TLM / Onewire
• Solder pad for RGB LEDs
• Supported ESC protocols
  
  • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
• KISS FC firmware
• *real Pit-Mode: A power supply pin which is remotely switchable

ESC

• Active current limiting @ 35A
• Input voltage: 3s-6s
• High quality 40V MOSFETs
• STM32G071 @ 64MHz
• up to 128 kHz Motor PWM
• Full sine wave control
• Automatic input signal detection
  
  • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
• FETtec ESC firmware
• Connector type: JST-SH-1mm

Dimensions

• Maximum outside dimensions: 30 x 37,5mm
  
  • Mounting hole arrangement: 20 x 20mm with M2 mounting hole (expandable to M3)
• Overall height: 7,9mm
• Weight: 8,9 g

Software

• KISS Firmware - Softwareupdate via FETtec Configurator
• FETtec ESCs Firmware - Softwareupdate via FETtec Configurator

Scope of delivery

• 1x FETtec AIO 35A lite
• 1x Capacitor 50V 470µF
• 2x 4 pin cable with JST connector on one side
• 1x 8 pin cable with JST connector on one side
• Standoffs