Overview
- Product Name: SpeedyBee F745 35A BLS AIO
- Power Input: 3S - 6S Lipo
- Mounting: 25.5 x 25.5mm, 3mm hole diameter
- Dimension: 36.5mm(L) x 36.5mm(W) x 7mm(H), recommended for quads at 3.5" or above
- Weight: 10.1g
FC Specification
- MCU: STM32F745
- IMU(Gyro): MPU6000
- USB Connection: Need to solder a USB TYPE-C module to D+,D-,GND pads.
- Barometer: BMP280
- OSD: Supported
- BLE Bluetooth: Supported. Used for parameter configuration,built-in a single 2.4 GHz Wi-Fi-and-Bluetooth combo chip
- Flash FC Firmware Wirelessly: Supported
- Download/Analyze Blackbox: Supported
- DJI Air Unit 6-pin Connector: Built-in.
- Flash(for BlackBox): 8MB
- Current Sensor: Supported. Scale=256
- BetaFlight Camera Control Pad: Yes(CC pad)
- 5V Output: 4 groups of 5V output. The total current load is 2.5A.
- 9V Output: None
- ESC Signal Pads: M1 - M4
- UART: Full UART * 4(UART1, UART2, UART3,UART4)
- ESC Telemetry UART: None
- I2C: Supported.
- LED Pad: Used for WS2812 LED
- Buzzer: BZ+ and BZ- pad used for 5V Buzzer
- BOOT Button: Used to enter DFU mode
- RSSI Input: Not supported
- SmartPort: Not Supported
- Supported Flight Controller: BetaFlight(Default)
- Firmware Target Name: SPEEDYBEE F745AIO
ESC Specfication
- Power Input: 3-6S LiPo
- Continuous Current: 35A * 4
- Burst Current: 45A(5seconds)
- ESC Protocol: DSHOT300/600
- Power Output: VBAT
- Current Sensor: Supported(Sacle=256)
- Firmware: BLHeli_S JH40
